$15 Flat Shipping Australia Wide
Price Guarantee*
Australian Owned & Operated

 

Super Bright LED Reverse Light

MP Concepts Smoked LED Reverse Light improves visibility and safety with an upgrade of appearance replacing the weak stock incandescent reverse light with 10 super bright white LEDs. You should check this out if you are looking to switch up your factory reverse light to modernize your rear end to blend well with the rest of the rear end and technology of your 2018-2021 Mustang while also getting a couple of functionalities.

 

Improves Rear Visibility

With a couple of LEDs at the bottom and a couple at the top in between the design, MP Concepts Mustang Reverse LED Light with 10 super bright white LEDs enhances the rear visibility as it is a lot brighter and wider than the factory incandescent bulb, making it a lot more attractive at the rear end.

 

Integrated Fourth Brake Light 

In addition to the combination of bright white LEDs, you are also getting a fourth brake light that comes on in bright red when you hit the break to match your taillights and it blends really well with the rest of the rear end. Please note: This feature may not be legal in your state in Australia, check with local authorities prior to making this function work.

 

Smoked Polycarbonate Lens

MP Concepts Mustang Reverse Led light comes with a smoked Polycarbonate lens which is darkened to give a nice stealthy appearance at the rear end while providing protection from stone chips.

 

Injected Molded ABS Housing

Rated to last the lifetime of your car, MP Concepts Mustang Reverse Led Light is molded out of high strength, light weighted ABS plastic housing which includes a smoked Polycarbonate Lens.

 

Straight forward Install with minor wiring required

This is a straightforward installation taking two hours from the start to finish as installation requires some splicing, splicing tabs are included. For the installation to go smoothly you may want some wire cutters, strippers, zip ties, electrical tape, and quick splice connectors on deck. Pigtail wires utilized by MP Concepts Mustang Reverse Led Light will need to be spliced into the stock wiring harness for operation.

 

Fits all 2018-2023 EcoBoost and GT Mustangs

This MP Concepts Smoked Mustang Reverse Led Light with fourth brake light is designed for all 2018-2023 GT, EcoBoost, GT350 and GT500 Mustang models. It is incompatible with the 2015-2017 models.

 

Compatibility

Fits ALL 2018, 2019, 2020, 2021, 2022 and 2023 - Ford Australia Mustang GT, ECOBOOST, BULLITT, MACH1, R-SPEC and CALIFORNIA SPECIAL [Fastback Models or Convertible Models]

Description

 

Super Bright LED Reverse Light

MP Concepts Smoked LED Reverse Light improves visibility and safety with an upgrade of appearance replacing the weak stock incandescent reverse light with 10 super bright white LEDs. You should check this out if you are looking to switch up your factory reverse light to modernize your rear end to blend well with the rest of the rear end and technology of your 2018-2021 Mustang while also getting a couple of functionalities.

 

Improves Rear Visibility

With a couple of LEDs at the bottom and a couple at the top in between the design, MP Concepts Mustang Reverse LED Light with 10 super bright white LEDs enhances the rear visibility as it is a lot brighter and wider than the factory incandescent bulb, making it a lot more attractive at the rear end.

 

Integrated Fourth Brake Light 

In addition to the combination of bright white LEDs, you are also getting a fourth brake light that comes on in bright red when you hit the break to match your taillights and it blends really well with the rest of the rear end. Please note: This feature may not be legal in your state in Australia, check with local authorities prior to making this function work.

 

Smoked Polycarbonate Lens

MP Concepts Mustang Reverse Led light comes with a smoked Polycarbonate lens which is darkened to give a nice stealthy appearance at the rear end while providing protection from stone chips.

 

Injected Molded ABS Housing

Rated to last the lifetime of your car, MP Concepts Mustang Reverse Led Light is molded out of high strength, light weighted ABS plastic housing which includes a smoked Polycarbonate Lens.

 

Straight forward Install with minor wiring required

This is a straightforward installation taking two hours from the start to finish as installation requires some splicing, splicing tabs are included. For the installation to go smoothly you may want some wire cutters, strippers, zip ties, electrical tape, and quick splice connectors on deck. Pigtail wires utilized by MP Concepts Mustang Reverse Led Light will need to be spliced into the stock wiring harness for operation.

 

Fits all 2018-2023 EcoBoost and GT Mustangs

This MP Concepts Smoked Mustang Reverse Led Light with fourth brake light is designed for all 2018-2023 GT, EcoBoost, GT350 and GT500 Mustang models. It is incompatible with the 2015-2017 models.

 

Product Reviews

Posted : 26 November 2022
David
(4)

Not a 5 min install thats for sure

I'd give it 5 stars, but the included instructions did not even closely match the wiring on my 2022 - well the colors matched, but they were the wrong wires. This install and troubleshooting took about 3 hours. The install is not that hard, taking maybe 45 minutes to remove the old light and replace it with the new one, but then I had to spend nearly an hour working out which pins to use, resorting to a multimeter and opening the car for the tail lights and an old car battery and block of wood to depress the brake to get that wire. After all this it looks great, with excellent reverse lighting compared with the original, a unique tail light and a very eye catching blinking brake light that should get peoples attention